Product Overview
Our HP Hose Sleeve thermal-barrier product can shield radiator hoses and hydraulic hoses from external heat damage, increasing their life and preventing breakdowns. Use HP Hose Sleeve to insulate air-intake tubes from radiant heat, lowering intake temperatures and increasing horsepower. A special thermal coating allows the HP Hose Sleeve to reflect and dissipate heat. The special braid gives it an expandable inside diameter of 1-3/4 to 2-3/8 inch. This thermal heat sleeving is capable of withstanding 1,200 degrees F continuous. It may be fastened using Thermal-Tie or hose clamps.
Features:
- Continuous operating temperature of 1200 degrees F, 2000 degrees F intermittent
- Capable of reducing up to 60 percent of radiant heat
- Helps to prevent vapor lock
- Protects wires from melting
- Sleeving wall thickness is 1/16 inch thick
- Size: 1.50 Inch ID x 3 Foot Roll
- Operational Temperature: 1200 degrees F
- Peak Temperature (30 seconds or less): 2000 degrees F
- Color: Tan
- Material: Fiberglass
- Made in the USA
- Sold As Each
Installation Tips:
- Slide On and Product can be placed directly on heat source
Warnings:
- Always wear safety glasses
- Dust mask, gloves and long sleeves are recommended when handling this product
Fitment:
Inside Diameter: 1.5 Inch
Finish: Bare
Peak temperature: 2000 Degrees F
Thickness: 1/16 Inch
Warranty:
90 Day Manufacturer DefectsWarning:
Warranty Information
90 Day Manufacturer Defects
