Product Overview
The Mega Oil Change Kit by Diesel Power USA
- Engine Flush
- Engine Oil Additive
- Fuel System Cleaner
- Valve Clean
- Injector Cleaner
Pro-Line Engine Flush
Product Information
Highly effective detergent additives in Engine Flush cleans interior engine before oil change.
Effect
- removes deposits, residues from all 4-stroke gasoline and diesel engines
- dissolves sludge, lacquer and isolates solid particles and liquid contaminants
- improves the combustion process and restores full engine performance
- prevents corrosion of unprotected metal surfaces
- recovers oil lubricating properties
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro Line Engine Flush is compatible with all commercially available engine oils. Minimum oil filling of 3 liters (3.17 U.S. QT) is required for optimum product performance. Note: Not suitable for use on motorbikes with wet clutches.
CERA TEC Engine Oil Additive
Product Information
Cera Tec is a high-tech ceramic wear protection product for all motor oils. Cera Tec reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines.
Effect:
- reduces friction and wear
- prevents direct metal-to-metal contact
- reduces fuel consumption
- lasts up to 30.000 miles (50.000 km)
Properties
- reduces frictional losses
- suitable for diesel particulate filters
- mixable with all commercially available motor oils
- increases smooth operation
- highest thermal stability
- excellent high and low temperature behavior
- tested for catalytic converters
- stable under extreme pressures
- compatible with fine filters
- no deposits
- long engine service life
- chemically inert
- reduces fuel consumption
Application
300 ml is sufficient for up to 1.3 gal (5 liters) of motor oil. Long-term effect up to 30.000 miles (50.000 km). Shake container before use. Minimum oil filling of 3 liters (3.17 U.S. QT) is required for optimum product performance.
Great to use in Engines, Manual Transmission assemblies, Differentials without clutches.
Fuel System Cleaner
Description
Contains a highly effective combination of cleaning and treatment additives for all gasoline injection systems such as K, KE, L-Jetronic and similar systems.
Effect:
- cleans fuel residues from and treats the injector system and components of the fuel system after repairs on the fuel system
- removes carbon and other deposits from fuel distributors and injector valves - effective on all injector systems
- precise injector dosage and atomization
- secures optimum driveability and low fuel consumption
- guarantees low levels of pollutants in the exhaust
- increases operational reliability and economy
Benefits
- guarantees low fuel consumption
- increases operational reliability
- removes carbon deposits from the intake valves and in the combustion chamber
- reduces pollutant emissions
Application
To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 7 gal. is requested for optimum product performance. Contents of can sufficient for max. 17.5 gal (70 liters) of fuel.
Valve Clean
Valve Clean is an ash-free, self-mixing combination of active agents, formulated according to the latest additive, fuel and engine technologies and specially developed to fulfill the demands of today's engines, fuels and running conditions.
Effect
- breaks down deposits on valves and in the combustion chamber
- removes and dissolves residues throughout the fuel system
- protects against corrosion throughout the fuel system
- environmentally friendly and economical
- proven performance with catalytic converters and turbochargers
Properties
- reduces deposits
- reduces residues
- good corrosion protection
- tested for turbochargers and catalytic converters
- burns ash-free
- environmentally friendly
- economical
Application
One 150 ml can of Valve Clean treats 20 gal (75l) of gasoline. Minimum fuel filling of 7 gal. is required for optimum product performance.
For best results add Valve Clean to gasoline at least at the oil change interval or at each fuel re-fill.
Best suited for non-direct injected engines.
Fuel Injection Cleaner
Gasoline additive keeps all internal components of the injection system clean.
Fuel injector cleaner
Effect
- cleans injectors without removal
- keeps intake valves clean
- reduces fuel consumption and exhaust emissions
- restores performance, driveability and durability promotes accurate injector dosing
- smother idling, good throttle response
- no starting problems and no lean surging
Properties
- cleans the injection system
- assures precise atomization
- better driveability normalizes gasoline consumption and exhaust emissions values
- tested for catalytic converters
Areas of application
For rectifying problems such as difficulties with starting, irregular idling, poor throttle response, performance losses, surges due to lean mixture and poor exhaust values caused by contaminated injection systems. Repeat treatment if problems reoccur. Suitable for all gasoline injection systems.
Application
One 300 ml can is sufficient for up to 20 gallons of fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous. Minimum fuel filling of 7 gal. is required for optimum product performance. We recommend using this product at least at every oil service or at every fuel fill up. We recommend this to be used in all Direct Injection applications.
